FASTTT PRO-X1 TRIATHLON MONO AEROBAR
WHY BUY FROM MORE AERO?
Free EU Shipping
No Import Duties or Hidden Customs Charges within the EU
Authorised FastTT Retailer
Expert Pre-Sale and After-Sale Support
Help With Sizing, Compatibility and Adapter Selection
Products Checked Before Dispatch
Support With Complete Cockpit Setup and Accessories
Secure Online Payment
FASTTT PRO-X1
The FastTT Pro-X1 is FastTT’s premium integrated mono aerobar system, developed for triathletes looking to maximise aerodynamic performance while maintaining the support and comfort required for long-distance racing.
Rather than using conventional separate extensions and elbow cups, the Pro-X1 creates a highly integrated interface between the rider’s hands, forearms and elbows.
The result is a cleaner frontal profile, reduced exposed hardware and a cockpit designed specifically around maintaining an aerodynamic position for extended periods.
DEVELOPED FOR MAXIMUM AERODYNAMIC PERFORMANCE
FastTT developed the Pro-X1 around the principle of:
Comfort + Control + Speed = Efficiency
The system uses a continuous mono-bar design to minimise the aerodynamic disruption created by conventional separate extensions, cups and brackets.
FastTT has carried out independent wind-tunnel testing at the University of Auckland, with the Pro-X1 developed to perform particularly well in aggressive high-hand positions.
The exact aerodynamic benefit will depend on the individual rider, position, bike, speed and overall cockpit setup.
INTEGRATED MONO-BAR DESIGN
The Pro-X1 combines the hand grip, forearm support and elbow interface into one integrated aerodynamic structure.
Benefits include:
Reduced exposed cockpit hardware
Smooth airflow around the arms and extensions
Increased forearm support
Stable hand positioning
Clean integrated appearance
Designed for sustained long-course aerodynamic positions
Unlike traditional extensions where the rider is supported mainly at the elbow pads, the Pro-X1 provides considerably more support along the forearms.
This can help reduce the muscular effort required to maintain an aggressive position over long-distance racing.
HYBRID CARBON CONSTRUCTION
The Pro-X1 uses a combination of carbon fibre and advanced manufacturing techniques to create a structure that is both aerodynamic and highly integrated.
Structural sections use carbon fibre where stiffness and strength are required, while the central structure allows FastTT to create complex aerodynamic shapes that would be difficult to manufacture using conventional methods alone.
The Pro-X1 is finished in a clean UD carbon appearance.
FastTT states that its aerobar systems are tested beyond the requirements of the relevant ISO 4210 bicycle safety standards.
Correct installation remains critical, particularly where the FastTT adapter system attaches to the bicycle. FastTT specifically highlights adequate bolt engagement and correct installation at this interface in its current installation documentation. (Fasttt Bike)
SIZING
The Pro-X1 is available in multiple sizes to suit different rider positions.
Bar Sizes
Medium
Large
X-Large
Width Options
240 mm
255 mm
270 mm
A Narrow Bracket Kit provides additional adjustment for riders looking to reduce elbow width further.
Choosing the correct combination of length and width is particularly important with an integrated system such as the Pro-X1.
If you are unsure which size is suitable, contact us before ordering and we can help determine the correct setup.
HIGH-HAND POSITIONING
The Pro-X1 is designed to work particularly well with modern high-hand aerodynamic positions.
Bar angle can be adjusted using the appropriate FastTT riser and mounting configuration, allowing the cockpit to be tailored around the rider’s position.
FastTT offers dedicated Adjustable Angled Risers as part of its cockpit system.
The exact available adjustment will depend on the bike, adapter and existing cockpit hardware.
FOREARM AND ELBOW SUPPORT
A defining feature of the Pro-X1 is the amount of contact between the rider and the aerobar.
The system supports substantially more of the forearm than a conventional elbow-cup setup.
This is designed to improve:
Comfort
Stability
Control
Ability to maintain an aerodynamic position
Pressure distribution across the arms
FastTT also uses a configurable elbow-support and padding system so the cockpit can be tailored to different arm shapes and riding positions.
BTA HYDRATION
The Pro-X1 can be combined with FastTT’s dedicated X-Kahuna BTA hydration system.
This allows bottles to be positioned between the arms while maintaining the integrated appearance and aerodynamic philosophy of the cockpit.
FastTT also offers compatibility solutions for riders using its existing Big Kahuna hydration components.
The BTA system is available separately.
COMPUTER MOUNT
The Pro-X1 can be configured with FastTT’s dedicated computer mounting system.
Options are available for:
Garmin
Wahoo
The mount positions the computer neatly between the arms and integrates it into the cockpit rather than requiring a conventional external computer bracket.
BIKE COMPATIBILITY
FastTT uses bike-specific Adapter Plates to install its aerobar systems across a wide range of modern triathlon and TT bikes.
The Pro-X1 does not simply bolt directly to every base bar.
Depending on your bike you may require:
FastTT Adapter Plate
FastTT Bar Brackets
Adjustable Angled Riser
Additional spacers
Bike-specific mounting hardware
FastTT’s own fitment documentation shows that installation varies considerably between bikes. For example, the Specialized Shiv Tri mono-riser setup uses a dedicated FastTT Shiv mono adapter plate alongside the bar bracket and angled riser. (Fasttt Bike)
The Factor Hanzo uses a different mounting arrangement involving the Factor mono riser and FastTT mounting hardware. (Fasttt Bike)
Please contact us before ordering if you are unsure which adapter or mounting hardware your bike requires.
ELECTRONIC SHIFTING
The Pro-X1 is intended primarily for modern electronic groupsets.
Typical compatible setups include:
Shimano Di2
SRAM AXS
Electronic shifting allows the cables and controls to integrate cleanly into the cockpit.
Compatibility should be confirmed before ordering if you are using a less common configuration.
WHAT’S INCLUDED
The Pro-X1 package includes the main aerobar system and associated FastTT mounting components required for the selected configuration.
Depending on the option selected, this may include:
Pro-X1 Mono Aerobar
FastTT bar mounting brackets
Narrow-position hardware
Arm support and padding
Garmin or Wahoo computer mount
Required aerobar-specific hardware
Bike-specific adapter plates, risers and BTA components may be sold separately depending on your setup.
WHO IS THE PRO-X1 FOR?
The Pro-X1 is ideal for riders who:
Prioritise maximum aerodynamic performance
Race Ironman or 70.3
Spend long periods continuously in the aero position
Prefer substantial forearm support
Want a highly integrated cockpit
Already have a reasonably established bike fit
Are looking to upgrade from conventional extensions and elbow cups
For riders who require greater adjustability or are still significantly changing their position, the FastTT Pro-RS may be a more suitable option.
MADE TO ORDER
FastTT products are manufactured in specialist production runs and availability can vary.
Please allow for production and dispatch time when ordering.
If you have a specific race date, contact us before purchasing and we can confirm current availability and expected lead time.
NEED HELP WITH SIZING OR COMPATIBILITY?
FastTT cockpits are highly configurable and the correct setup depends on both the rider and the bike.
We can help determine:
Correct Pro-X1 size
Correct width
Required bike adapter
Riser requirements
BTA setup
Garmin or Wahoo mount option
Overall cockpit compatibility
For sizing or compatibility advice, contact:
info@getmoreaero.com
FASTTT PRO-X1 TRIATHLON MONO AEROBAR
WHY BUY FROM MORE AERO?
Free EU Shipping
No Import Duties or Hidden Customs Charges within the EU
Authorised FastTT Retailer
Expert Pre-Sale and After-Sale Support
Help With Sizing, Compatibility and Adapter Selection
Products Checked Before Dispatch
Support With Complete Cockpit Setup and Accessories
Secure Online Payment
FASTTT PRO-X1
The FastTT Pro-X1 is FastTT’s premium integrated mono aerobar system, developed for triathletes looking to maximise aerodynamic performance while maintaining the support and comfort required for long-distance racing.
Rather than using conventional separate extensions and elbow cups, the Pro-X1 creates a highly integrated interface between the rider’s hands, forearms and elbows.
The result is a cleaner frontal profile, reduced exposed hardware and a cockpit designed specifically around maintaining an aerodynamic position for extended periods.
DEVELOPED FOR MAXIMUM AERODYNAMIC PERFORMANCE
FastTT developed the Pro-X1 around the principle of:
Comfort + Control + Speed = Efficiency
The system uses a continuous mono-bar design to minimise the aerodynamic disruption created by conventional separate extensions, cups and brackets.
FastTT has carried out independent wind-tunnel testing at the University of Auckland, with the Pro-X1 developed to perform particularly well in aggressive high-hand positions.
The exact aerodynamic benefit will depend on the individual rider, position, bike, speed and overall cockpit setup.
INTEGRATED MONO-BAR DESIGN
The Pro-X1 combines the hand grip, forearm support and elbow interface into one integrated aerodynamic structure.
Benefits include:
Reduced exposed cockpit hardware
Smooth airflow around the arms and extensions
Increased forearm support
Stable hand positioning
Clean integrated appearance
Designed for sustained long-course aerodynamic positions
Unlike traditional extensions where the rider is supported mainly at the elbow pads, the Pro-X1 provides considerably more support along the forearms.
This can help reduce the muscular effort required to maintain an aggressive position over long-distance racing.
HYBRID CARBON CONSTRUCTION
The Pro-X1 uses a combination of carbon fibre and advanced manufacturing techniques to create a structure that is both aerodynamic and highly integrated.
Structural sections use carbon fibre where stiffness and strength are required, while the central structure allows FastTT to create complex aerodynamic shapes that would be difficult to manufacture using conventional methods alone.
The Pro-X1 is finished in a clean UD carbon appearance.
FastTT states that its aerobar systems are tested beyond the requirements of the relevant ISO 4210 bicycle safety standards.
Correct installation remains critical, particularly where the FastTT adapter system attaches to the bicycle. FastTT specifically highlights adequate bolt engagement and correct installation at this interface in its current installation documentation. (Fasttt Bike)
SIZING
The Pro-X1 is available in multiple sizes to suit different rider positions.
Bar Sizes
Medium
Large
X-Large
Width Options
240 mm
255 mm
270 mm
A Narrow Bracket Kit provides additional adjustment for riders looking to reduce elbow width further.
Choosing the correct combination of length and width is particularly important with an integrated system such as the Pro-X1.
If you are unsure which size is suitable, contact us before ordering and we can help determine the correct setup.
HIGH-HAND POSITIONING
The Pro-X1 is designed to work particularly well with modern high-hand aerodynamic positions.
Bar angle can be adjusted using the appropriate FastTT riser and mounting configuration, allowing the cockpit to be tailored around the rider’s position.
FastTT offers dedicated Adjustable Angled Risers as part of its cockpit system.
The exact available adjustment will depend on the bike, adapter and existing cockpit hardware.
FOREARM AND ELBOW SUPPORT
A defining feature of the Pro-X1 is the amount of contact between the rider and the aerobar.
The system supports substantially more of the forearm than a conventional elbow-cup setup.
This is designed to improve:
Comfort
Stability
Control
Ability to maintain an aerodynamic position
Pressure distribution across the arms
FastTT also uses a configurable elbow-support and padding system so the cockpit can be tailored to different arm shapes and riding positions.
BTA HYDRATION
The Pro-X1 can be combined with FastTT’s dedicated X-Kahuna BTA hydration system.
This allows bottles to be positioned between the arms while maintaining the integrated appearance and aerodynamic philosophy of the cockpit.
FastTT also offers compatibility solutions for riders using its existing Big Kahuna hydration components.
The BTA system is available separately.
COMPUTER MOUNT
The Pro-X1 can be configured with FastTT’s dedicated computer mounting system.
Options are available for:
Garmin
Wahoo
The mount positions the computer neatly between the arms and integrates it into the cockpit rather than requiring a conventional external computer bracket.
BIKE COMPATIBILITY
FastTT uses bike-specific Adapter Plates to install its aerobar systems across a wide range of modern triathlon and TT bikes.
The Pro-X1 does not simply bolt directly to every base bar.
Depending on your bike you may require:
FastTT Adapter Plate
FastTT Bar Brackets
Adjustable Angled Riser
Additional spacers
Bike-specific mounting hardware
FastTT’s own fitment documentation shows that installation varies considerably between bikes. For example, the Specialized Shiv Tri mono-riser setup uses a dedicated FastTT Shiv mono adapter plate alongside the bar bracket and angled riser. (Fasttt Bike)
The Factor Hanzo uses a different mounting arrangement involving the Factor mono riser and FastTT mounting hardware. (Fasttt Bike)
Please contact us before ordering if you are unsure which adapter or mounting hardware your bike requires.
ELECTRONIC SHIFTING
The Pro-X1 is intended primarily for modern electronic groupsets.
Typical compatible setups include:
Shimano Di2
SRAM AXS
Electronic shifting allows the cables and controls to integrate cleanly into the cockpit.
Compatibility should be confirmed before ordering if you are using a less common configuration.
WHAT’S INCLUDED
The Pro-X1 package includes the main aerobar system and associated FastTT mounting components required for the selected configuration.
Depending on the option selected, this may include:
Pro-X1 Mono Aerobar
FastTT bar mounting brackets
Narrow-position hardware
Arm support and padding
Garmin or Wahoo computer mount
Required aerobar-specific hardware
Bike-specific adapter plates, risers and BTA components may be sold separately depending on your setup.
WHO IS THE PRO-X1 FOR?
The Pro-X1 is ideal for riders who:
Prioritise maximum aerodynamic performance
Race Ironman or 70.3
Spend long periods continuously in the aero position
Prefer substantial forearm support
Want a highly integrated cockpit
Already have a reasonably established bike fit
Are looking to upgrade from conventional extensions and elbow cups
For riders who require greater adjustability or are still significantly changing their position, the FastTT Pro-RS may be a more suitable option.
MADE TO ORDER
FastTT products are manufactured in specialist production runs and availability can vary.
Please allow for production and dispatch time when ordering.
If you have a specific race date, contact us before purchasing and we can confirm current availability and expected lead time.
NEED HELP WITH SIZING OR COMPATIBILITY?
FastTT cockpits are highly configurable and the correct setup depends on both the rider and the bike.
We can help determine:
Correct Pro-X1 size
Correct width
Required bike adapter
Riser requirements
BTA setup
Garmin or Wahoo mount option
Overall cockpit compatibility
For sizing or compatibility advice, contact:
info@getmoreaero.com
