Winspace C6 Endurance Road Bike
Winspace C6 Endurance Road Bike
Why Buy from More Aero?
Authorised Winspace retailer based in Ireland.
Expert advice on sizing, specification and setup.
Personal support before and after your purchase.
No import duties or unexpected customs charges within Ireland.
Help with warranty claims, with More Aero as your point of contact.
Professional assembly and collection from our Dublin workshop are included with Irish complete-bike orders. Ready-to-ride home delivery within Ireland is available for an additional €100.
Performance for the Long Ride
The Winspace C6 combines the responsiveness of a performance road bike with the comfort and versatility needed for longer days in the saddle. Its endurance geometry provides a slightly more upright riding position, while clearance for tyres up to 40 mm gives you more freedom on rough roads, cobbles and light gravel sections.
The frame uses T800 and M40J carbon fibres. Dropped seatstays, a bowed seat tube and a D-shaped seatpost are designed to provide vertical compliance at the rear, while a rigid lower frame supports efficient power transfer.
Fully integrated cable routing creates a clean finish, and the Fidlock downtube storage compartment keeps small essentials within the bike.
Choose your preferred build using the Groupset dropdown:
Shimano 105 Mechanical.
Shimano 105 Di2.
Shimano Ultegra Di2.
Shimano 105 Mechanical
Mechanical Shimano 105 shifting, hydraulic disc brakes, Routte Hard D50 wheels and Continental Grand Prix tyres make this the accessible starting point in the C6 range.
Frame, Fork and Weight
Complete bike weight: Approximately 8.3 kg, size M without pedals.
Frame: Winspace C6, T800 + M40J carbon.
Frame weight: 850 g, plus or minus 30 g; size M, unpainted, with all parts removed.
Fork: Full-carbon C6 fork.
Fork weight: 410 g, plus or minus 15 g; size M, unpainted.
Headset system: 1.5-inch FSA ACR.
Bottom bracket shell: T47 threaded, 85.5 mm internal; M47 x P1.0.
Cable routing: Fully integrated.
Storage: Fidlock downtube compartment with magnetic closure.
Maximum tyre size: 40 mm front and rear; Winspace specifies a 4 mm clearance margin.
Frame drivetrain compatibility: Mechanical and electronic.
Groupset and Brakes
Shifting: Shimano 105 mechanical, 2 x 12-speed.
Shifters: Shimano 105 ST-R7120.
Front derailleur: Shimano 105 FD-R7100-F.
Rear derailleur: Shimano 105 RD-R7100.
Crankset: Shimano 105 FC-R7100.
Chainrings: 52/36T.
Crank length options: 165, 170 or 172.5 mm.
Cassette: Shimano 105 CS-R7101, 11-34T.
Chain: Shimano CN-M6100.
Brakes: Hydraulic disc, flat mount.
Frame rotor compatibility: Front 160 mm; rear 140 or 160 mm.
Wheels and Tyres
Standard wheelset: Lún Routte Hard D50.
Tyres: Continental Grand Prix, 700 x 32C.
Hub spacing: Front 12 x 100 mm; rear 12 x 142 mm.
Front thru-axle specification: M12 x P1.0 x 114L.
Rear thru-axle specification: M12 x P1.0 x 163L.
Cockpit and Contact Points
Handlebar: HYPER integrated carbon handlebar, matt black.
Bar tape: Selle Italia.
Saddle: Velo VL 1C22.
Seatpost: D-shaped aero seatpost with 10 mm setback.
Seatpost length: 320 mm for XS/S; 360 mm for M/L/XL.
Handlebar and Stem Options
The standard HYPER integrated carbon handlebar is available in these combinations:
360 mm width: 85, 95, 115, 125, 135 or 145 mm stem.
380 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
400 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
420 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
The optional HYPER 2 Riser handlebar is available at additional cost:
Widths: 360, 380, 400 or 420 mm.
Stem lengths: 85, 95, 105, 115, 125 or 135 mm.
Please include your preferred handlebar width, stem length and crank length in your order notes. Combinations are subject to availability.
Wheel Upgrades
The standard wheelset is the Routte Hard D50.
The following HYPER 3 wheelsets are available as paid upgrades:
HYPER 3 D45: black with white decals.
HYPER 3 D45: UD matt with laser decals.
HYPER 3 D67: black with white decals.
HYPER 5 upgrades are available in 40/40, 50/50 or 60/60 mm front/rear depths.
Each HYPER 5 depth is offered in four finishes:
Matt black with white decals.
UD matt with laser decals.
Glossy black with white decals.
Butterfly weave.
Contact More Aero for pricing before ordering a wheel or cockpit upgrade.
Included Equipment and Accessories
Alongside the specified frame, fork, drivetrain, wheels, tyres and cockpit, Winspace lists:
Velo VL 1C22 saddle.
Aero seatpost and seatpost wedge.
Steel-rail saddle clamp.
Computer mount kit.
One pre-installed UDH derailleur hanger.
Seatpost dust cover.
Four bottle-cage bolts.
Assembly tool kit.
Pedal equipment; model and type are not specified.
A spare derailleur hanger and bottle cages are not listed. Brake-caliper and rotor models, tubeless setup and power-meter inclusion are not specified in the published build details. Contact us if you require confirmation before ordering.
Colours and Sizes
Colours: Neon Twilight, Alpine Blue, Chameleon White and Anthracite.
Sizes: XS, S, M, L and XL.
XXL: Shown in Winspace's geometry chart; enquire about availability.
Shimano 105 Di2
Electronic Shimano 105 Di2 shifting brings precise gear changes to the C6 platform. This build combines Routte Hard D50 wheels and Continental Grand Prix tyres with a Selle Italia Novus Boost Evo X-Cross Superflow saddle.
Frame, Fork and Weight
Complete bike weight: Approximately 8.1 kg, size M without pedals.
Frame: Winspace C6, T800 + M40J carbon.
Frame weight: 850 g, plus or minus 30 g; size M, unpainted, with all parts removed.
Fork: Full-carbon C6 fork.
Fork weight: 410 g, plus or minus 15 g; size M, unpainted.
Headset system: 1.5-inch FSA ACR.
Bottom bracket shell: T47 threaded, 85.5 mm internal; M47 x P1.0.
Cable routing: Fully integrated.
Storage: Fidlock downtube compartment with magnetic closure.
Maximum tyre size: 40 mm front and rear; Winspace specifies a 4 mm clearance margin.
Frame drivetrain compatibility: Mechanical and electronic.
Groupset and Brakes
Shifting: Shimano 105 Di2 electronic, 2 x 12-speed.
Shifters: Shimano 105 ST-R7170.
Front derailleur: Shimano 105 FD-R7150.
Rear derailleur: Shimano 105 RD-R7150.
Crankset: Shimano 105 FC-R7100.
Chainrings: 52/36T.
Crank length options: 165, 170 or 172.5 mm.
Cassette: Shimano 105 CS-R7101, 11-34T.
Chain: Shimano CN-M6100.
Brakes: Hydraulic disc, flat mount.
Frame rotor compatibility: Front 160 mm; rear 140 or 160 mm.
Wheels and Tyres
Standard wheelset: Lún Routte Hard D50.
Tyres: Continental Grand Prix, 700 x 32C.
Hub spacing: Front 12 x 100 mm; rear 12 x 142 mm.
Front thru-axle specification: M12 x P1.0 x 114L.
Rear thru-axle specification: M12 x P1.0 x 163L.
Cockpit and Contact Points
Handlebar: HYPER integrated carbon handlebar, matt black.
Bar tape: Selle Italia.
Saddle: Selle Italia Novus Boost Evo X-Cross Superflow.
Seatpost: D-shaped aero seatpost with 10 mm setback.
Seatpost length: 320 mm for XS/S; 360 mm for M/L/XL.
Handlebar and Stem Options
The standard HYPER integrated carbon handlebar is available in these combinations:
360 mm width: 85, 95, 115, 125, 135 or 145 mm stem.
380 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
400 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
420 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
The optional HYPER 2 Riser handlebar is available at additional cost:
Widths: 360, 380, 400 or 420 mm.
Stem lengths: 85, 95, 105, 115, 125 or 135 mm.
Please include your preferred handlebar width, stem length and crank length in your order notes. Combinations are subject to availability.
Wheel Upgrades
The standard wheelset is the Routte Hard D50.
The following HYPER 3 wheelsets are available as paid upgrades:
HYPER 3 D45: black with white decals.
HYPER 3 D45: UD matt with laser decals.
HYPER 3 D67: black with white decals.
HYPER 5 upgrades are available in 40/40, 50/50 or 60/60 mm front/rear depths.
Each HYPER 5 depth is offered in four finishes:
Matt black with white decals.
UD matt with laser decals.
Glossy black with white decals.
Butterfly weave.
Contact More Aero for pricing before ordering a wheel or cockpit upgrade.
Included Equipment and Accessories
Alongside the specified frame, fork, drivetrain, wheels, tyres and cockpit, Winspace lists:
Selle Italia Novus Boost Evo X-Cross Superflow saddle.
Aero seatpost and seatpost wedge.
Steel-rail saddle clamp.
Computer mount kit.
One pre-installed UDH derailleur hanger.
Seatpost dust cover.
Four bottle-cage bolts.
Assembly tool kit.
Pedal equipment; model and type are not specified.
A spare derailleur hanger and bottle cages are not listed. Brake-caliper and rotor models, tubeless setup and power-meter inclusion are not specified in the published build details. Contact us if you require confirmation before ordering.
Colours and Sizes
Colours: Neon Twilight, Alpine Blue, Chameleon White and Anthracite.
Sizes: XS, S, M, L and XL.
XXL: Shown in Winspace's geometry chart; enquire about availability.
Shimano Ultegra Di2
The lightest of the three standard C6 builds combines Shimano Ultegra Di2 electronic shifting with HYPER 3 wheels and Michelin Power Protection tyres.
A choice of three HYPER 3 configurations is included, allowing you to select your preferred wheel depth and finish.
Frame, Fork and Weight
Complete bike weight: Approximately 7.6 kg, size M without pedals.
Frame: Winspace C6, T800 + M40J carbon.
Frame weight: 850 g, plus or minus 30 g; size M, unpainted, with all parts removed.
Fork: Full-carbon C6 fork.
Fork weight: 410 g, plus or minus 15 g; size M, unpainted.
Headset system: 1.5-inch FSA ACR.
Bottom bracket shell: T47 threaded, 85.5 mm internal; M47 x P1.0.
Cable routing: Fully integrated.
Storage: Fidlock downtube compartment with magnetic closure.
Maximum tyre size: 40 mm front and rear; Winspace specifies a 4 mm clearance margin.
Frame drivetrain compatibility: Mechanical and electronic.
Groupset and Brakes
Shifting: Shimano Ultegra Di2 electronic, 2 x 12-speed.
Shifters: Shimano Ultegra ST-R8170.
Front derailleur: Shimano Ultegra FD-R8150.
Rear derailleur: Shimano Ultegra RD-R8150.
Crankset: Shimano Ultegra FC-R8100.
Chainrings: 52/36T.
Crank length options: 165, 170 or 172.5 mm.
Cassette: Shimano Ultegra CS-R8101, 11-34T.
Chain: Shimano CN-M8100.
Brakes: Hydraulic disc, flat mount.
Frame rotor compatibility: Front 160 mm; rear 140 or 160 mm.
Wheels and Tyres
Standard wheelset: Lún HYPER 3, with D45 or D67 configurations listed below.
Tyres: Michelin Power Protection, 700 x 32C.
Hub spacing: Front 12 x 100 mm; rear 12 x 142 mm.
Front thru-axle specification: M12 x P1.0 x 114L.
Rear thru-axle specification: M12 x P1.0 x 163L.
Cockpit and Contact Points
Handlebar: HYPER integrated carbon handlebar, matt black.
Bar tape: Selle Italia.
Saddle: Selle Italia Novus Boost Evo X-Cross Superflow.
Seatpost: D-shaped aero seatpost with 10 mm setback.
Seatpost length: 320 mm for XS/S; 360 mm for M/L/XL.
Handlebar and Stem Options
The standard HYPER integrated carbon handlebar is available in these combinations:
360 mm width: 85, 95, 115, 125, 135 or 145 mm stem.
380 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
400 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
420 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
The optional HYPER 2 Riser handlebar is available at additional cost:
Widths: 360, 380, 400 or 420 mm.
Stem lengths: 85, 95, 105, 115, 125 or 135 mm.
Please include your preferred handlebar width, stem length and crank length in your order notes. Combinations are subject to availability.
Included Wheel Choices
Choose one of the following HYPER 3 configurations at no additional wheel-upgrade cost:
HYPER 3 D45: black with white decals.
HYPER 3 D45: UD matt with laser decals.
HYPER 3 D67: black with white decals.
Please include your preferred HYPER 3 configuration in your order notes.
HYPER 5 upgrades are available at additional cost in 40/40, 50/50 or 60/60 mm front/rear depths.
Each HYPER 5 depth is offered in four finishes:
Matt black with white decals.
UD matt with laser decals.
Glossy black with white decals.
Butterfly weave.
Contact More Aero for pricing before ordering a wheel or cockpit upgrade.
Included Equipment and Accessories
Alongside the specified frame, fork, drivetrain, wheels, tyres and cockpit, Winspace lists:
Selle Italia Novus Boost Evo X-Cross Superflow saddle.
Aero seatpost and seatpost wedge.
Steel-rail saddle clamp.
Computer mount kit.
One pre-installed UDH derailleur hanger.
Seatpost dust cover.
Four bottle-cage bolts.
Assembly tool kit.
Pedal equipment; model and type are not specified.
A spare derailleur hanger and bottle cages are not listed. Brake-caliper and rotor models, tubeless setup and power-meter inclusion are not specified in the published build details. Contact us if you require confirmation before ordering.
Colours and Sizes
Colours: Neon Twilight, Alpine Blue, Chameleon White and Anthracite.
Sizes: XS, S, M, L and XL.
XXL: Shown in Winspace's geometry chart; enquire about availability.
Sizing and Geometry
Height recommendations are a guide. For help choosing your size, send us your height, inseam and details of your current bike and riding position.
All dimensions below are in millimetres unless otherwise stated.
XS
Recommended rider height: 155-163 cm.
Stack / reach: 504 / 359.
Seat tube / top tube / head tube: 435 / 504 / 95.
Wheelbase / front centre: 978 / 574.
Head tube angle: 70.5 degrees.
Fork rake / trail with 35C tyres: 55 / 63.5.
Seatpost length: 320.
Standover: 734.
Stack-to-reach ratio: 1.40.
S
Recommended rider height: 163-170 cm.
Stack / reach: 529 / 367.
Seat tube / top tube / head tube: 460 / 519 / 121.
Wheelbase / front centre: 998 / 591.
Head tube angle: 70.5 degrees.
Fork rake / trail with 35C tyres: 55 / 63.5.
Seatpost length: 320.
Standover: 758.
Stack-to-reach ratio: 1.44.
M
Recommended rider height: 170-178 cm.
Stack / reach: 555 / 376.
Seat tube / top tube / head tube: 480 / 535 / 142.
Wheelbase / front centre: 994 / 591.
Head tube angle: 72 degrees.
Fork rake / trail with 35C tyres: 51 / 58.5.
Seatpost length: 360.
Standover: 782.
Stack-to-reach ratio: 1.48.
L
Recommended rider height: 178-185 cm.
Stack / reach: 580 / 385.
Seat tube / top tube / head tube: 505 / 551 / 168.
Wheelbase / front centre: 1011 / 608.
Head tube angle: 72 degrees.
Fork rake / trail with 35C tyres: 51 / 58.5.
Seatpost length: 360.
Standover: 805.
Stack-to-reach ratio: 1.51.
XL
Recommended rider height: 185-193 cm.
Stack / reach: 605 / 394.
Seat tube / top tube / head tube: 530 / 568 / 194.
Wheelbase / front centre: 1029 / 625.
Head tube angle: 72 degrees.
Fork rake / trail with 35C tyres: 51 / 58.5.
Seatpost length: 360.
Standover: 828.
Stack-to-reach ratio: 1.54.
XXL — Enquire About Availability
Recommended rider height: 193-200 cm.
Stack / reach: 630 / 403.
Seat tube / top tube / head tube: 550 / 584 / 220.
Wheelbase / front centre: 1046 / 642.
Head tube angle: 72 degrees.
Fork rake / trail with 35C tyres: 51 / 58.5.
Seatpost length: 360.
Standover: 852.
Stack-to-reach ratio: 1.56.
Dimensions Shared Across All Sizes
Chainstay length: 415 mm.
Bottom bracket drop: 74 mm.
Bottom bracket height: 276 mm.
Seat tube angle: 74 degrees.
Fork length: 380 mm.
Seatpost setback: 10 mm.
Maximum tyre size: 40 mm.
Ordering and Delivery
Select your groupset, frame size and colour, then provide your preferred handlebar width, stem length and crank length in your order notes.
For the Ultegra Di2 build, also include your preferred HYPER 3 wheel configuration. Contact info@getmoreaero.com before ordering paid wheel or cockpit upgrades.
Dublin workshop collection: Professional assembly and collection included with Irish complete-bike orders.
Ready-to-ride home delivery within Ireland: An additional €100.
Contact us for current availability and lead times for your preferred size and colour.
Weight and Specification Notes
All weights are Winspace's claimed figures. Complete-bike weights are for a size M without pedals. Frame weight is for an unpainted size M with all parts removed; fork weight is a separate unpainted size M figure.
Actual weight varies with frame size, paint finish, cockpit dimensions and wheel choice. Rotor compatibility describes the frame's supported rotor sizes and does not confirm the rotors supplied with each build.
Product photographs illustrate the C6 platform and colours. Refer to the specification for your selected groupset and wheel configuration.
Winspace C6 Endurance Road Bike
Why Buy from More Aero?
Authorised Winspace retailer based in Ireland.
Expert advice on sizing, specification and setup.
Personal support before and after your purchase.
No import duties or unexpected customs charges within Ireland.
Help with warranty claims, with More Aero as your point of contact.
Professional assembly and collection from our Dublin workshop are included with Irish complete-bike orders. Ready-to-ride home delivery within Ireland is available for an additional €100.
Performance for the Long Ride
The Winspace C6 combines the responsiveness of a performance road bike with the comfort and versatility needed for longer days in the saddle. Its endurance geometry provides a slightly more upright riding position, while clearance for tyres up to 40 mm gives you more freedom on rough roads, cobbles and light gravel sections.
The frame uses T800 and M40J carbon fibres. Dropped seatstays, a bowed seat tube and a D-shaped seatpost are designed to provide vertical compliance at the rear, while a rigid lower frame supports efficient power transfer.
Fully integrated cable routing creates a clean finish, and the Fidlock downtube storage compartment keeps small essentials within the bike.
Choose your preferred build using the Groupset dropdown:
Shimano 105 Mechanical.
Shimano 105 Di2.
Shimano Ultegra Di2.
Shimano 105 Mechanical
Mechanical Shimano 105 shifting, hydraulic disc brakes, Routte Hard D50 wheels and Continental Grand Prix tyres make this the accessible starting point in the C6 range.
Frame, Fork and Weight
Complete bike weight: Approximately 8.3 kg, size M without pedals.
Frame: Winspace C6, T800 + M40J carbon.
Frame weight: 850 g, plus or minus 30 g; size M, unpainted, with all parts removed.
Fork: Full-carbon C6 fork.
Fork weight: 410 g, plus or minus 15 g; size M, unpainted.
Headset system: 1.5-inch FSA ACR.
Bottom bracket shell: T47 threaded, 85.5 mm internal; M47 x P1.0.
Cable routing: Fully integrated.
Storage: Fidlock downtube compartment with magnetic closure.
Maximum tyre size: 40 mm front and rear; Winspace specifies a 4 mm clearance margin.
Frame drivetrain compatibility: Mechanical and electronic.
Groupset and Brakes
Shifting: Shimano 105 mechanical, 2 x 12-speed.
Shifters: Shimano 105 ST-R7120.
Front derailleur: Shimano 105 FD-R7100-F.
Rear derailleur: Shimano 105 RD-R7100.
Crankset: Shimano 105 FC-R7100.
Chainrings: 52/36T.
Crank length options: 165, 170 or 172.5 mm.
Cassette: Shimano 105 CS-R7101, 11-34T.
Chain: Shimano CN-M6100.
Brakes: Hydraulic disc, flat mount.
Frame rotor compatibility: Front 160 mm; rear 140 or 160 mm.
Wheels and Tyres
Standard wheelset: Lún Routte Hard D50.
Tyres: Continental Grand Prix, 700 x 32C.
Hub spacing: Front 12 x 100 mm; rear 12 x 142 mm.
Front thru-axle specification: M12 x P1.0 x 114L.
Rear thru-axle specification: M12 x P1.0 x 163L.
Cockpit and Contact Points
Handlebar: HYPER integrated carbon handlebar, matt black.
Bar tape: Selle Italia.
Saddle: Velo VL 1C22.
Seatpost: D-shaped aero seatpost with 10 mm setback.
Seatpost length: 320 mm for XS/S; 360 mm for M/L/XL.
Handlebar and Stem Options
The standard HYPER integrated carbon handlebar is available in these combinations:
360 mm width: 85, 95, 115, 125, 135 or 145 mm stem.
380 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
400 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
420 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
The optional HYPER 2 Riser handlebar is available at additional cost:
Widths: 360, 380, 400 or 420 mm.
Stem lengths: 85, 95, 105, 115, 125 or 135 mm.
Please include your preferred handlebar width, stem length and crank length in your order notes. Combinations are subject to availability.
Wheel Upgrades
The standard wheelset is the Routte Hard D50.
The following HYPER 3 wheelsets are available as paid upgrades:
HYPER 3 D45: black with white decals.
HYPER 3 D45: UD matt with laser decals.
HYPER 3 D67: black with white decals.
HYPER 5 upgrades are available in 40/40, 50/50 or 60/60 mm front/rear depths.
Each HYPER 5 depth is offered in four finishes:
Matt black with white decals.
UD matt with laser decals.
Glossy black with white decals.
Butterfly weave.
Contact More Aero for pricing before ordering a wheel or cockpit upgrade.
Included Equipment and Accessories
Alongside the specified frame, fork, drivetrain, wheels, tyres and cockpit, Winspace lists:
Velo VL 1C22 saddle.
Aero seatpost and seatpost wedge.
Steel-rail saddle clamp.
Computer mount kit.
One pre-installed UDH derailleur hanger.
Seatpost dust cover.
Four bottle-cage bolts.
Assembly tool kit.
Pedal equipment; model and type are not specified.
A spare derailleur hanger and bottle cages are not listed. Brake-caliper and rotor models, tubeless setup and power-meter inclusion are not specified in the published build details. Contact us if you require confirmation before ordering.
Colours and Sizes
Colours: Neon Twilight, Alpine Blue, Chameleon White and Anthracite.
Sizes: XS, S, M, L and XL.
XXL: Shown in Winspace's geometry chart; enquire about availability.
Shimano 105 Di2
Electronic Shimano 105 Di2 shifting brings precise gear changes to the C6 platform. This build combines Routte Hard D50 wheels and Continental Grand Prix tyres with a Selle Italia Novus Boost Evo X-Cross Superflow saddle.
Frame, Fork and Weight
Complete bike weight: Approximately 8.1 kg, size M without pedals.
Frame: Winspace C6, T800 + M40J carbon.
Frame weight: 850 g, plus or minus 30 g; size M, unpainted, with all parts removed.
Fork: Full-carbon C6 fork.
Fork weight: 410 g, plus or minus 15 g; size M, unpainted.
Headset system: 1.5-inch FSA ACR.
Bottom bracket shell: T47 threaded, 85.5 mm internal; M47 x P1.0.
Cable routing: Fully integrated.
Storage: Fidlock downtube compartment with magnetic closure.
Maximum tyre size: 40 mm front and rear; Winspace specifies a 4 mm clearance margin.
Frame drivetrain compatibility: Mechanical and electronic.
Groupset and Brakes
Shifting: Shimano 105 Di2 electronic, 2 x 12-speed.
Shifters: Shimano 105 ST-R7170.
Front derailleur: Shimano 105 FD-R7150.
Rear derailleur: Shimano 105 RD-R7150.
Crankset: Shimano 105 FC-R7100.
Chainrings: 52/36T.
Crank length options: 165, 170 or 172.5 mm.
Cassette: Shimano 105 CS-R7101, 11-34T.
Chain: Shimano CN-M6100.
Brakes: Hydraulic disc, flat mount.
Frame rotor compatibility: Front 160 mm; rear 140 or 160 mm.
Wheels and Tyres
Standard wheelset: Lún Routte Hard D50.
Tyres: Continental Grand Prix, 700 x 32C.
Hub spacing: Front 12 x 100 mm; rear 12 x 142 mm.
Front thru-axle specification: M12 x P1.0 x 114L.
Rear thru-axle specification: M12 x P1.0 x 163L.
Cockpit and Contact Points
Handlebar: HYPER integrated carbon handlebar, matt black.
Bar tape: Selle Italia.
Saddle: Selle Italia Novus Boost Evo X-Cross Superflow.
Seatpost: D-shaped aero seatpost with 10 mm setback.
Seatpost length: 320 mm for XS/S; 360 mm for M/L/XL.
Handlebar and Stem Options
The standard HYPER integrated carbon handlebar is available in these combinations:
360 mm width: 85, 95, 115, 125, 135 or 145 mm stem.
380 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
400 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
420 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
The optional HYPER 2 Riser handlebar is available at additional cost:
Widths: 360, 380, 400 or 420 mm.
Stem lengths: 85, 95, 105, 115, 125 or 135 mm.
Please include your preferred handlebar width, stem length and crank length in your order notes. Combinations are subject to availability.
Wheel Upgrades
The standard wheelset is the Routte Hard D50.
The following HYPER 3 wheelsets are available as paid upgrades:
HYPER 3 D45: black with white decals.
HYPER 3 D45: UD matt with laser decals.
HYPER 3 D67: black with white decals.
HYPER 5 upgrades are available in 40/40, 50/50 or 60/60 mm front/rear depths.
Each HYPER 5 depth is offered in four finishes:
Matt black with white decals.
UD matt with laser decals.
Glossy black with white decals.
Butterfly weave.
Contact More Aero for pricing before ordering a wheel or cockpit upgrade.
Included Equipment and Accessories
Alongside the specified frame, fork, drivetrain, wheels, tyres and cockpit, Winspace lists:
Selle Italia Novus Boost Evo X-Cross Superflow saddle.
Aero seatpost and seatpost wedge.
Steel-rail saddle clamp.
Computer mount kit.
One pre-installed UDH derailleur hanger.
Seatpost dust cover.
Four bottle-cage bolts.
Assembly tool kit.
Pedal equipment; model and type are not specified.
A spare derailleur hanger and bottle cages are not listed. Brake-caliper and rotor models, tubeless setup and power-meter inclusion are not specified in the published build details. Contact us if you require confirmation before ordering.
Colours and Sizes
Colours: Neon Twilight, Alpine Blue, Chameleon White and Anthracite.
Sizes: XS, S, M, L and XL.
XXL: Shown in Winspace's geometry chart; enquire about availability.
Shimano Ultegra Di2
The lightest of the three standard C6 builds combines Shimano Ultegra Di2 electronic shifting with HYPER 3 wheels and Michelin Power Protection tyres.
A choice of three HYPER 3 configurations is included, allowing you to select your preferred wheel depth and finish.
Frame, Fork and Weight
Complete bike weight: Approximately 7.6 kg, size M without pedals.
Frame: Winspace C6, T800 + M40J carbon.
Frame weight: 850 g, plus or minus 30 g; size M, unpainted, with all parts removed.
Fork: Full-carbon C6 fork.
Fork weight: 410 g, plus or minus 15 g; size M, unpainted.
Headset system: 1.5-inch FSA ACR.
Bottom bracket shell: T47 threaded, 85.5 mm internal; M47 x P1.0.
Cable routing: Fully integrated.
Storage: Fidlock downtube compartment with magnetic closure.
Maximum tyre size: 40 mm front and rear; Winspace specifies a 4 mm clearance margin.
Frame drivetrain compatibility: Mechanical and electronic.
Groupset and Brakes
Shifting: Shimano Ultegra Di2 electronic, 2 x 12-speed.
Shifters: Shimano Ultegra ST-R8170.
Front derailleur: Shimano Ultegra FD-R8150.
Rear derailleur: Shimano Ultegra RD-R8150.
Crankset: Shimano Ultegra FC-R8100.
Chainrings: 52/36T.
Crank length options: 165, 170 or 172.5 mm.
Cassette: Shimano Ultegra CS-R8101, 11-34T.
Chain: Shimano CN-M8100.
Brakes: Hydraulic disc, flat mount.
Frame rotor compatibility: Front 160 mm; rear 140 or 160 mm.
Wheels and Tyres
Standard wheelset: Lún HYPER 3, with D45 or D67 configurations listed below.
Tyres: Michelin Power Protection, 700 x 32C.
Hub spacing: Front 12 x 100 mm; rear 12 x 142 mm.
Front thru-axle specification: M12 x P1.0 x 114L.
Rear thru-axle specification: M12 x P1.0 x 163L.
Cockpit and Contact Points
Handlebar: HYPER integrated carbon handlebar, matt black.
Bar tape: Selle Italia.
Saddle: Selle Italia Novus Boost Evo X-Cross Superflow.
Seatpost: D-shaped aero seatpost with 10 mm setback.
Seatpost length: 320 mm for XS/S; 360 mm for M/L/XL.
Handlebar and Stem Options
The standard HYPER integrated carbon handlebar is available in these combinations:
360 mm width: 85, 95, 115, 125, 135 or 145 mm stem.
380 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
400 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
420 mm width: 85, 95, 105, 115, 125, 135 or 145 mm stem.
The optional HYPER 2 Riser handlebar is available at additional cost:
Widths: 360, 380, 400 or 420 mm.
Stem lengths: 85, 95, 105, 115, 125 or 135 mm.
Please include your preferred handlebar width, stem length and crank length in your order notes. Combinations are subject to availability.
Included Wheel Choices
Choose one of the following HYPER 3 configurations at no additional wheel-upgrade cost:
HYPER 3 D45: black with white decals.
HYPER 3 D45: UD matt with laser decals.
HYPER 3 D67: black with white decals.
Please include your preferred HYPER 3 configuration in your order notes.
HYPER 5 upgrades are available at additional cost in 40/40, 50/50 or 60/60 mm front/rear depths.
Each HYPER 5 depth is offered in four finishes:
Matt black with white decals.
UD matt with laser decals.
Glossy black with white decals.
Butterfly weave.
Contact More Aero for pricing before ordering a wheel or cockpit upgrade.
Included Equipment and Accessories
Alongside the specified frame, fork, drivetrain, wheels, tyres and cockpit, Winspace lists:
Selle Italia Novus Boost Evo X-Cross Superflow saddle.
Aero seatpost and seatpost wedge.
Steel-rail saddle clamp.
Computer mount kit.
One pre-installed UDH derailleur hanger.
Seatpost dust cover.
Four bottle-cage bolts.
Assembly tool kit.
Pedal equipment; model and type are not specified.
A spare derailleur hanger and bottle cages are not listed. Brake-caliper and rotor models, tubeless setup and power-meter inclusion are not specified in the published build details. Contact us if you require confirmation before ordering.
Colours and Sizes
Colours: Neon Twilight, Alpine Blue, Chameleon White and Anthracite.
Sizes: XS, S, M, L and XL.
XXL: Shown in Winspace's geometry chart; enquire about availability.
Sizing and Geometry
Height recommendations are a guide. For help choosing your size, send us your height, inseam and details of your current bike and riding position.
All dimensions below are in millimetres unless otherwise stated.
XS
Recommended rider height: 155-163 cm.
Stack / reach: 504 / 359.
Seat tube / top tube / head tube: 435 / 504 / 95.
Wheelbase / front centre: 978 / 574.
Head tube angle: 70.5 degrees.
Fork rake / trail with 35C tyres: 55 / 63.5.
Seatpost length: 320.
Standover: 734.
Stack-to-reach ratio: 1.40.
S
Recommended rider height: 163-170 cm.
Stack / reach: 529 / 367.
Seat tube / top tube / head tube: 460 / 519 / 121.
Wheelbase / front centre: 998 / 591.
Head tube angle: 70.5 degrees.
Fork rake / trail with 35C tyres: 55 / 63.5.
Seatpost length: 320.
Standover: 758.
Stack-to-reach ratio: 1.44.
M
Recommended rider height: 170-178 cm.
Stack / reach: 555 / 376.
Seat tube / top tube / head tube: 480 / 535 / 142.
Wheelbase / front centre: 994 / 591.
Head tube angle: 72 degrees.
Fork rake / trail with 35C tyres: 51 / 58.5.
Seatpost length: 360.
Standover: 782.
Stack-to-reach ratio: 1.48.
L
Recommended rider height: 178-185 cm.
Stack / reach: 580 / 385.
Seat tube / top tube / head tube: 505 / 551 / 168.
Wheelbase / front centre: 1011 / 608.
Head tube angle: 72 degrees.
Fork rake / trail with 35C tyres: 51 / 58.5.
Seatpost length: 360.
Standover: 805.
Stack-to-reach ratio: 1.51.
XL
Recommended rider height: 185-193 cm.
Stack / reach: 605 / 394.
Seat tube / top tube / head tube: 530 / 568 / 194.
Wheelbase / front centre: 1029 / 625.
Head tube angle: 72 degrees.
Fork rake / trail with 35C tyres: 51 / 58.5.
Seatpost length: 360.
Standover: 828.
Stack-to-reach ratio: 1.54.
XXL — Enquire About Availability
Recommended rider height: 193-200 cm.
Stack / reach: 630 / 403.
Seat tube / top tube / head tube: 550 / 584 / 220.
Wheelbase / front centre: 1046 / 642.
Head tube angle: 72 degrees.
Fork rake / trail with 35C tyres: 51 / 58.5.
Seatpost length: 360.
Standover: 852.
Stack-to-reach ratio: 1.56.
Dimensions Shared Across All Sizes
Chainstay length: 415 mm.
Bottom bracket drop: 74 mm.
Bottom bracket height: 276 mm.
Seat tube angle: 74 degrees.
Fork length: 380 mm.
Seatpost setback: 10 mm.
Maximum tyre size: 40 mm.
Ordering and Delivery
Select your groupset, frame size and colour, then provide your preferred handlebar width, stem length and crank length in your order notes.
For the Ultegra Di2 build, also include your preferred HYPER 3 wheel configuration. Contact info@getmoreaero.com before ordering paid wheel or cockpit upgrades.
Dublin workshop collection: Professional assembly and collection included with Irish complete-bike orders.
Ready-to-ride home delivery within Ireland: An additional €100.
Contact us for current availability and lead times for your preferred size and colour.
Weight and Specification Notes
All weights are Winspace's claimed figures. Complete-bike weights are for a size M without pedals. Frame weight is for an unpainted size M with all parts removed; fork weight is a separate unpainted size M figure.
Actual weight varies with frame size, paint finish, cockpit dimensions and wheel choice. Rotor compatibility describes the frame's supported rotor sizes and does not confirm the rotors supplied with each build.
Product photographs illustrate the C6 platform and colours. Refer to the specification for your selected groupset and wheel configuration.